Great-plains 3S-4000F Predelivery Manual Manuel d'utilisateur télécharger pdf (Page 14)

3S-4000

195-242Q

9/12/2009

Hitching Tractor to Drill

DANGER

You may be severely injured or killed by being crushed

between the tractor and drill. Do not stand or place

any part of your body between drill and moving trac-

tor. Stop tractor engine and set park brake before in-

stalling the hitch pin.

WARNING

This drill can have positive and negative tongue

weight, which can work the hitch pin loose during

transport. To avoid serious injury or death due to a

road accident, always use a clevis hitch or clevis draw-

bar with a locking-style hitch pin.

1. Choose a drill-hitch option that is compatible

with your tractor drawbar.

The 3S-4000 has three hitch options:

• a clevis hitch,

• a small-hole, single-strap hitch or

• a large-hole, single-strap hitch.

Use the clevis hitch with tractors that have

single-tang drawbars.Use the single-strap

hitch for tractors with clevis drawbars. Always

use a locking-style hitch pin sized to match

the holes in the hitch and drawbar.

2. To adjust the drill hitch to match your tractor-

drawbar height, mount tongue jack on side of

tongue as shown. Use jack to raise drill

tongue so lowest hitch hole is 18 inches off

ground.

18941

Setup

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 34 35

Pas de commentaire

Great-plains 3S-4000F Predelivery Manual Manuel d'utilisateur Page 14