Great-plains 107-137V Bearing Manuel d'utilisateur télécharger pdf

Great Plains Manufacturing, Inc.

© Copyright 2012 Printed 01/09/2012 401-811M

How To: Insert Bearing into Opener Blade Flange

Instructions:

These instructions explain how

to insert a bearing into a bear-

ing ﬂange so no damage

results to the bearing.

CAUTION: Do not push on

the inner race of the bearing

only, doing so will damage

the bearing and it will need

to be replaced.

If there is bearing damage the

opener blade will not perform

correctly.

1. Position the ﬂange on a

ﬂat surface on the bed of

a hydraulic or manual

press (as shown in Fig 1).

Note: There is an orientation

groove on the outside edge of

the bearing to indicate that end

faces out (as shown in Fig 1).

2. Set the bearing in the

ﬂange with the orientation

groove up (as shown in

Fig 1).

3. Lay a heavy bar or plate

(

3

⁄

4

” to 1” thick) across the

bearing so it is pushing on

the inner race and outer

race of the bearing at the

same time.

4. Operate the press to push

the bearing into the ﬂange

until it is “seated” in the

ﬂange.

Part# Description

107-137V Flange and Bearing Assy

Bearing

Flange

32496

Figure 1

1

Instructions: 1

Résumé du contenu

Page 1 - Instructions:

Great Plains Manufacturing, Inc.© Copyright 2012 Printed 01/09/2012 401-811MHow To: Insert Bearing into Opener Blade FlangeInstructions:These instruct

Commentaires sur ces manuels

Pas de commentaire