Great-plains Inner Pivot Shear Manuel d'utilisateur télécharger pdf

Great Plains Mfg., Inc.

Used with:

Installation Instructions

506-254M

Front Fold Boom Sprayer

Inner Pivot Shear Update

• TSF 1080

• TSF 1090

• TSF 1280

• TSF 1290

General Information

When you see this symbol, the subsequent instructions and

warnings are serious - follow without exception. Your life and

the lives of others depend on it!

These instructions explain how to install the Inner

Pivot Shear Kit.

These instructions apply to:

506-264A Inner Pivot Shear Kit TSF90

Manual Update

Refer to the Front Fold Boom Sprayer operator’s

manual for detailed information on safely operat-

ing, adjusting, troubleshooting and maintaining

the Inner Pivot Shear Kit. Refer to the parts man-

ual for part identiﬁcation.

500-641M Operator’s Manual

500-641P Parts Manual

9/21/2004

Before You Start

Page 3 is a detailed listing of parts included in the

Inner Pivot Shear Update package. Use this list to

inventory parts received.

Tools Required

• Basic hand tools

Deﬁnitions

Right-hand and left-hand as used in this manual

are determined by facing the direction the ma-

chine will travel while in use unless otherwise

stated.

Assembly Instructions

Refer to the drawing on the next page.

1. Unfold and support the inner booms. They will

need to be disconnected completely. Remove the

tilt cylinder pin from the top of the pivot tube and

the tilt pivot pin (39) from the bottom of the pivot

tube.

2. Unbolt the upper pivot pin (4) at the top of the piv-

ot tube, remove the shims (3), and lift out. Re-

move the pin (16) from the inner fold cylinder (17)

and swivel the cylinder away from the pivot post.

3. Lift up on the pivot post (11) and remove it. Leave

the lower pivot pin in place.

4. Take the replacement pivot tube shear bolt as-

sembly and place it on the lower pivot pin (10).

Replace the upper pivot pin (4), shims (3) and

thrust washer (6). Make sure the pivot tube is

free to rotate.

5. Reconnect the inner fold cylinder to the pivot

tube shear plate. Position the inner boom on the

pivot tube and replace the tilt pivot pin (39). Re-

connect the tilt cylinder to the lug at the top of the

pivot post.

6. Make sure all bolts are in Place and tightened.

1 2 3

Résumé du contenu

Page 1 - Assembly Instructions

Page 2 - Inner Pivot Shear Update

506-254M 9/21/2004Great Plains Mfg., Inc.Inner Pivot Shear Update221805

Page 3 - Great Plains Mfg., Inc

506-254M9/21/2004Great Plains Mfg., Inc.3Installation Instructions506-264A Inner Pivot Shear Kit TSF90Your kit includes:1 506-254S INNER PIVOT TUB

Commentaires sur ces manuels

Pas de commentaire

Great-plains Inner Pivot Shear Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel Great-plains Inner Pivot Shear. Great Plains Inner Pivot Shear User Manual [en] Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Great-plains Inner Pivot Shear