Great-plains Auto Reset Bolt Retainer Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel Great-plains Auto Reset Bolt Retainer. Great Plains Auto Reset Bolt Retainer User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 3
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
© Copyright 2004 Printed
Great Plains Mfg., Inc.
Used with:
Installation Instructions
598-026M
Auto Reset Shank
Auto Reset Bolt Retainer
Auto Reset Shank
General Information
When you see this symbol, the subsequent instructions and
warnings are serious - follow without exception. Your life and
the lives of others depend on it!
!
!
These instructions explain how to install the Auto
Reset Bolt Retainer. A retaining lock to keep auto
reset bolts from turning loose.
These instructions apply to:
598-025A Auto Reset Bolt Retainer
11/17/2004
Before You Start
Page 3 is a detailed listing of parts included in the
Auto Reset Bolt Retainer package. Use this list to
inventory parts received.
Tools Required
Basic hand tools
Assembly Instructions
Refer to Figure 1
1. Raise the implement and install transport
locks. Place tractor in park, turn off ignition
and remove the key before performing up-
date.
2. Remove the rear 5/8" x 8" bolt (2) and 5/8"
lock nut from the rear spring channel (3).
Keep the bolt and nut for reuse.
NOTE: If the 5/8" bolt (2) is binding it will be nec-
essary to adjust the 1" bolts (4) in to relieve pres-
sure on bolt (2).
!
DANGER!
Do Not drive or force bolt (2) out. The stored energy of
the springs could cause damage or bodily injury when
released. Use bolts (4) to relieve pressure on bolt (2).
3. Place a block (1) under the spring to support
the springs.
4. Unscrew the 1" x 14" bolts (4) evenly from the
springs and remove leaving the spring chan-
nel (3) in place. Keep the bolts.
Figure 1
Remove Bolts
22808
Vue de la page 0
1 2 3

Résumé du contenu

Page 1 - Assembly Instructions

© Copyright 2004 Printed Great Plains Mfg., Inc. Used with:Installation Instructions598-026MAuto Reset ShankAuto Reset Bolt Retainer• Auto Reset Shank

Page 2 - Install Lock Clamp

598-026M 11/29/2004Great Plains Mfg., Inc.Auto Reset Bolt Retainer 2Refer to Figure 25. Clean and oil the threads on the 1" x 14" bolts. 6.

Page 3 - Great Plains Mfg., Inc

598-026M11/29/2004Great Plains Mfg., Inc. 3Installation Instructions598-025A AUto Reset Bolt Retainer KitYour kit includes:1 598-026M MANUAL AUTOR

Commentaires sur ces manuels

Pas de commentaire