Great-plains P14888 Serial No 18007975 Manuel d'utilisateur télécharger pdf (Page 17)

17SL700

Operating Instructions

2.5 Folding and Unfolding

2.5.1 Unfolding into the Work

Position

1 Raise the machine until the pointer is

aligned with the mark on the lift cylinder.

2 Fully extend the tine beam to release the

transport lock.

3 Unfold the machine until the pointer

reaches the red line on the wing cylinder

and stop. (Using the pointers / markers

ensures that the machine is folding

under 4m).

Ensure the wings unfold together (ie.

symmetrically). If they don‘t, fold

them and start again.

4 Fully retract the tine b eam.

5 Raise the machine enough for the wings

to clear the ground when unfolding.

6 Resume unfolding the wings until fully

unfolded.

2. Transportation / Installation

2.5.2 Folding into the

Transport Position

1 Draw up the rear roll and isolate the

circuit using the taps.

2 Retract the tine beam.

3 Raise the machine enough for the wings

to clear the ground when folding.

4 Fold the machine until the marker on the

wing cylinder reaches the red line.

Ensure the wings fold together (ie.

symmetrically). If they don‘t, unfold

them and start again.

5 Lower the machine until the marker on

the lift cylinder reaches the red line.

6 Finish folding the machine until the wing

lock engages.

7 Lower the machine the remainder of the

way onto the transport shims.

8 The machine is now ready for road

transport.

Road transport speed should not

exceed 16mph (25kmh).

Fig. 2.02: Lift Cylinder Pointer and Marker

Fig. 2.03: Wing Cylinder Pointer and Marker

Fig. 2.04: Folding the SL700

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 35 36

Commentaires sur ces manuels

Pas de commentaire