Great-plains 2N-3020 Assembly Instructions Manuel d'utilisateur télécharger pdf

Assembly Instructions

Great Plains Mfg., Inc.

Used with:

•

113-502M

24- and 30-Foot, No-Till

Flat Fold Marker Option

2N-2410 and 2N-3010 Drills

2N-2420 and 2N-3020 Drills

General Information

These instructions explain how to assemble, install and setup the

optional hydraulic markers for your two-section, folding no-till

drill. The units are operated hydraulically and have a cast hub, ta-

pered roller bearings and a bolt-on notched blade to cut though

heavy residue, leaving a line to follow on the next ﬁeld pass.

Markers are sold as single or dual units. Dual markers are

equipped with a sequence valve for easy operation.

These instructions apply to:

113-498A 24-Foot No-Till Left-Hand Flat-Fold Marker

113-499A 24-Foot No-Till Dual Flat-Fold Markers

113-500A 30-Foot No-Till Left-Hand Flat-Fold Marker

113-501A 30-Foot No-Till Dual Flat-Fold Markers

Manual Update

Refer to the drill operator’s manual for detailed information on

safely operating, adjusting, troubleshooting and maintaining the

markers. Refer to the drill parts manual for part identiﬁcation.

• 2N-2410 and 2N-3010 Operator’s Manual . . . . . . . . . . . . . . . . . . . . 196-126M

• 2N-2420 and 2N-3020 Operator’s Manual . . . . . . . . . . . . . . . . . . . . 196-164M

• 2N-2410 and 2N-3010 Parts Manual . . . . . . . . . . . . . . . . . . . . . . . . 196-126P

• 2N-2420 and 2N-3020 Parts Manual . . . . . . . . . . . . . . . . . . . . . . . . 196-164P

Deﬁnitions

Right and left as used in this manual are determined by facing

the direction the machine will travel while in use unless otherwise

stated.

IMPORTANT: A crucial point of information related to the

preceding topic. For safe and correct operation, read and

follow the directions provided before continuing.

NOTE: Useful infor-

mation related to the

preceding topic.

■

When you see this symbol, the subsequent instructions

and warnings are serious - follow without exception. Your

life and the lives of others depend on it!

Before You Start

Pages 8 through 11 are detailed listings of parts included in the

marker kit. Use these lists to inventory parts received.

Assembly and Setup Instructions

Marker Assembly

Refer to Figure 1.

1. Park the drill in an area large enough for folding and unfold-

ing the assembled markers. A single marker will increase

the width of the drill by 15 feet.

1. Unfold and lower the drill. Park and shut off the tractor.

2. The marker sections are pre-assembled and banded to-

gether for shipment. Unpack the shipment and group the as-

semblies according to right-hand or left-hand.

CAUTION!

Do not lift the assemblies unassisted. Lifting the assemblies without

mechanical aid could cause severe injury. Use a forklift or hoist to

move the assemblies during installation, or disassemble the assemblies

into smaller pieces before installation.

WARNING!

You could be severely injured by a failing assembly. Obey all safety in-

structions from lifting-equipment manufacturer. Do not walk or place

any body part under the raised sections. Be sure lifting equipment has

enough capacity.

NOTE: These instructions explain how to assemble the marker

if the sections are completely disassembled. If you do not have

adequate lifting equipment, disassemble the sections before

proceeding. If you do have a forklift or hoist large enough to lift

the pre-assembled sections, you can skip many of the following

steps.

3. Install the left-hand marker mount (1) on the left wing (2) of

the drill. Install the mount as close to the outside of the drill

as possible. Fasten the mount to the 6-by-8-inch frame tube

using two u-bolts (3), lock washers (4) and nuts (5). Install

the ﬁrst section of the marker (6) on the mount (1) by push-

ing the pivot shaft (7) through the pivot holes on the mount

and the ﬁrst section. Use the bolt (8) and lock nut (9) to se-

cure the shaft.

Mount the left-hand breakaway hinge (10) onto the ﬁrst sec-

tion (6) by pushing the pivot shaft (11) through the pivot

holes in each

part. Use the

bolt (8) and lock

nut (9) to secure

the shaft.

Figure 1

Marker Assembly

1 2 3 4 5 6 ... 10 11

Résumé du contenu

Page 1 - WARNING!

Page 2 - Assembly Instructions

Great Plains Mfg., Inc.Listing of Parts24- and 30-Foot, No-Till Flat Fold Marker Option 113-502M 4/9/0410Qty. Part No. Part Description 113-500A 30

Page 3

Great Plains Mfg., Inc. 4/9/0424- and 30-Foot, No-Till Flat Fold Marker Option 113-502MListing of Parts11Qty. Part No. Part Description 113-501A 30-

Page 4

224- and 30-Foot, No-Till Flat Fold Marker Option 113-502M 4/9/04Great Plains Mfg., Inc.Assembly InstructionsRefer to Figure 2.4. Pin the base end o

Page 5 - Single-Marker Hydraulics

34/9/0424- and 30-Foot, No-Till Flat Fold Marker Option 113-502MGreat Plains Mfg., Inc. Assembly Instructions Refer to Figure 1.8. Attach the secon

Page 6 - Dual Marker Hydraulics

Figure 1Attaching Fourth Section11103424- and 30-Foot, No-Till Flat Fold Marker Option 113-502M 4/9/04Great Plains Mfg., Inc.Assembly Instructions R

Page 7

54/9/0424- and 30-Foot, No-Till Flat Fold Marker Option 113-502MGreat Plains Mfg., Inc. Assembly Instructions Single-Marker HydraulicsIMPORTANT: JI

Page 8

624- and 30-Foot, No-Till Flat Fold Marker Option 113-502M 4/9/04Great Plains Mfg., Inc.Assembly Instructions Dual Marker HydraulicsNOTE: JIC ﬁtting

Page 9

74/9/0424- and 30-Foot, No-Till Flat Fold Marker Option 113-502MGreat Plains Mfg., Inc. Assembly Instructions Setup Adjustments1. Storage Saddle. W

Page 10 - Listing of Parts

Great Plains Mfg., Inc.Listing of Parts24- and 30-Foot, No-Till Flat Fold Marker Option 113-502M 4/9/048Qty. Part No. Part Description 113-498A 24-F

Page 11

Great Plains Mfg., Inc. 4/9/0424- and 30-Foot, No-Till Flat Fold Marker Option 113-502MListing of Parts9Qty. Part No. Part Description 1 113-180H

Commentaires sur ces manuels

Pas de commentaire

Great-plains 2N-3020 Assembly Instructions Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel de jardinage Great-plains 2N-3020 Assembly Instructions. Great Plains 2N-3020 Assembly Instructions User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel de jardinage Great-plains 2N-3020 Assembly Instructions