Great-plains 2420P Assembly Instructions Manuel d'utilisateur télécharger pdf (Page 5)

4/8/2004

120-299M

Great Plains Mfg., Inc.

Installation Instructions

Refer to Figure 9

14. Install speed sensor on sensor U-mount

bracket on the left-hand gauge wheel. Adjust

to within .030 clearance of sensor disk and

snugly tighten jam nut.

Refer to Figure 10

15. Install the sensor module to the gauge wheel

bracket with black cable ties provided with kit.

Connect short cable to the wheel sensor and

route the long cable to the control module.

Connect the cable to the controller (you may

need to coil some extra cable on the 15’ mod-

els), then secure with cable ties.

16. Uncoil the main harness from the control

module and route it with the hydraulic hoses

along the hitch to the tractor. Secure as need-

ed with cable ties. Install the plastic hose label

to the hoses with “extension” symbol on hose

running to the ﬁlter (marked P) on the control

module. Use the yellow cable tie to identify

this as a motor hose. Attach the motor return

hose (marked T) on the side showing the “re-

traction” symbol. Run tie strap through the

number which will correspond to the valve 2

through 4 which the drive will be connected to.

WARNING!

Escaping ﬂuid under pressure can have sufﬁcient pres-

sure to penetrate the skin. Check all hydraulic lines

and ﬁttings before applying pressure. Fluid escaping

from a very small hole can be almost invisible. Use pa-

per or cardboard, not body parts, and wear heavy

gloves to check for suspected leaks. If injured, seek

medical assistance from a doctor that is familiar with

this type of injury. Foreign ﬂuids in the tissue must be

surgically removed within a few hours or gangrene

will result.

Wheel

sensor

Figure 9

Speed Sensor

Figure 10

Sensor Module

19975

19976

1 2 3 4 5 6 7 8

Commentaires sur ces manuels

Pas de commentaire

Great-plains 2420P Assembly Instructions Manuel d'utilisateur Page 5

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel de jardinage Great-plains 2420P Assembly Instructions